Shaft support with twin wall connector (for neg. press. only) – MEZS

Shaft support with twin wall connector (for neg. press. only) – MEZS

Shaft support with twin wall connector (for neg. press. only) – MEZS is part of the Schiedel ME range, which has a number of applications and advantages.


  • Shaft liner in renovation projects
  • Air inlet & ventilation systems
  • Flue system for condensing heaters and boilers
  • Chimney renovation


  • Stress free thermal expansion
  • Can be connected to MF flue system
  • High quality stainless steel system
  • High temperature silicone sealing ring
  • Universal application
  • Light weight system
  • Chimney fire resistant
SKU: Shaft support with twin wall connector (for neg. press. only) - MEZS Category: Tags: , , ,

Available Options:


ME system is a modular single wall flue/chimney system, made of stainless steel with a silicone sealing ring.

ME is a universal flue/chimney system which is suitable for both high and low temperatures, non-condensing and condensing applications with flue gasses under positive and negative  pressure. It can resist a chimney fire.

Therefore the system is suitable for a wide range of applications such as boilers, stoves, ovens and a ventilation system. The system can also be used for CHP applications, in this case a special VITON® sealing ring might be necessary.

Technical characteristics
Application System Chimney/Connecting Flue Pipe/Chimney Liner
Operating mode Dry/wet
Pressure N1/P1/H1
Max. working pressure 5000 Pa
Max. operating temperature 600°C (negative pressure – N1 applications) 200°C (positive pressure – P1/H1 applications)
Soot Fire Resistant* Yes (see G designations below) No (see O designations below)
Inner wall material AISI 316L/EN 1.4404
Inner wall thickness Ø80 – Ø200: 0.4mm Ø250 – Ø300: 0.5mm Ø350: 0.6mm
Fuel type Oil/wood/coal/pellets normal (wood)/gas
Sealant Elastomer. (Where case flue gas temperatures exceed 200°C, sealants as well as the cap and door seals should be removed before installation)


For stove and chimney installers – whenever you register an installation with our easy to use, online guarantee registration portal, you will now accrue points based on the number of installations and installation type. So start to register your installations, taking full advantage of our Lifetime Guarantee on Flex and ICID, as well as guarantees on all our other ranges, and to start earning points 🙂

CE approved | EN 1856-1: System Chimney

T200 P1/H1 W V2 L50050 O30

CE approved | EN 1856-2: Connecting Flue Pipe

T200 P1/H1 W V2 L50050 O30 M
T600 N1 D V2 L50050 G400 M

CE approved | EN1856-2: Chimney Liner

T200 P1/H1 W V2 L50050 O
T600 N1 D V2 L50050 G

* Above CE designations refer to Ø80-300 – For larger diameters please contact us.